The HMEC 25-KA is a very lightweight and comfortable closed pilot's headset with stereojack and PJ-068 Connector. The nominal impedance of the headphone is 200 Ohm. For the power supply of NoiseGard 2x1,5V Batteries are needed.
HMEC 25-CA
04316
The HMEC 25-CA is a very lightweight and comfortable closed pilot's headset with XLR-5 Connector. The nominal impedance of the headset is 200 Ohm. For the power supply of NoiseGard 2x1,5V Batteries are needed.
HMEC 25-CAL
04934
The HMEC 25-CAL is a very lightweight and comfortable closed pilot's headset with XLR-5 Connector. The nominal impedance of the headphone is 200 Ohm. 28 VDC NoiseGard powering from board via pin 5 of the XLR-connector.
HMEC 25-KAL
04935
The HMEC 25-KAL is a very lightweight and comfortable closed pilot's headset with stereojack and PJ-068 Connector. The nominal impedance ot the headphone is 200 Ohm. 28 VDC NoiseGard powering from board via tip of the microphone-connector.
HMEC 25-CAP
04566
The HMEC 25-CAP is a very lightweight and comfortable closed pilot's headset with XLR-5 Connector. the nominal impedance of the headphone is 600 Ohm. 28 VDC NoiseGard powering from board via pin 5 of the XLR-connector.
HMEC 25-KAP
04567
The HMEC 25-KAP is a very lightweight and comfortable closed pilot's headset with stereojack and PJ-068 Connector. The nominal impedance of the headphone is 480 Ohm. 28 VDC NoiseGard Power from board via tip of the microphone connector.
HMEC 25-KAX-1
04648
The HMEC 25-KAX-1 is a very lightweight and comfortable closed pilot's headset with stereojack, PJ-068 Connector and XLR-3 Connector for powering the NoiseGard from board.
HMEC 25-KAP-2
05307
The HMEC 25-KAP-2 is a very lightweight and comfortable closed pilot's headset with stereojack and PJ-068 Connector. The nominal impedance of the headphone is 200 Ohm. 12-35 VDC NoiseGard Power from board via tip of the microphone connector.
HMEC 25-DAP
500880
The HMEC 25-CAP is a very lightweight and comfortable closed pilot's headset with XLR-6 Connector. the nominal impedance of the headphone is 600 Ohm. 28 VDC NoiseGard powering from board via pin 5 and 6 of the XLR-connector.
HMEC 25-6A
05308
The HMEC 25-CAL is a very lightweight and comfortable closed pilot's headset with 6-pin Connector. The nominal impedance of the headphone is 200 Ohm. 12 - 35 VDC NoiseGard powering from board.
